32PCS Valve Core Remover Installer Tool

Valve Core Remover Installer Tool with Dual Size SAE 1/4 & 5/16 Port, 20 PCS Valve Cores with Teflon Seal and 10 PCS Brass Nuts, Compatible with R22 R12 R407 R410 R404 R32 R600 A/C

Product description
Valve core removal wrench basic operation
1.Pull out the dead point on the stem, close the valve on the tool, adjust the joint of the tool to the air conditioning interface, and tighten the valve on the air conditioning.
2.Make sure that the tool is connected tightly to the air conditioning valve, then open the valve on the tool. Push the stem into the air conditioning valve and gently rotate the tail knob of the remover. Find the angle to connect the valve core, and then loosen it.
3.When the valve core is removed, pull out the stem, close the valve on the valve remover, loosen the screw at the end of the tool and take out the valve core. The work is done!

Upgrade Environmentally Friendly Valve Cores: The bottom of our valve cores are golden yellow, longer service life than ordinary valve cores, strong resistance to fluorine, stronger heat.
Easy to Install: The valve core remover installer tools core grabber tool makes it be easily inserted into the inner valve core to control the core. No need to stop the machine, no need to release the refrigerant.
Wide Application: Suitable for all refrigeration equipment, dual size( SAE 1/4'' & 5/16'' Port ) design makes the valve core remover installer tool be compatible with R22, R12, R407, R410, R404, R32 A/C air condition system, etc.
Great Design: Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn. (No Gas Loss). Anti-slip design increase hand friction, prevent all kinds of overpowered valves; High-quality craftsmanship probes, rugged and durable, suitable for most equipments.

Package Included:
1X Valve Core Remover
1X R410 R32 Brass Adapter
20X Valve Cores
10X brass nuts.